| Category Temperature Range | -55 to +105 | |
| Rated Voltage Range | 2.5 to 25Vdc | |
| Capacitance Range | 56 to 1,200F | |
| Capacitance Tolerance | 20% (M) (at 20, 120Hz) | |
| Leakage Current | Shall not exceed values shown in STANDARD RATINGS (at 20 after 2 minutes) | |
| Dissipation Factor (tan) | 0.12 max. (at 20, 120Hz) | |
| Low Temperature Characteristics (Max. Impedance Ratio) | Z(-25)/Z(+20)1.15
Z(-55)/Z(+20)1.25 (at 100kHz) | |
| Endurance | Satisfied after 15,000 hours at 105 with rated voltage applied (Appearance, Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial) | |
| Bias Humidity | Satisfied after 1,000 hours at 60, 90-95% RH with DC rated voltage applied (Appearance, Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial) | |
| Surge Voltage | Subjected to 1,000 cycles at 105 (30s charge with surge voltage via R=1k, 5m 30s discharge) | See table for specific surge voltages per rated voltage. |
| Soldering Heat | Satisfied after soldering under recommended conditions (Appearance, Capacitance value within tolerance, D.F. (tan) initial, ESR initial, Leakage current initial) | |
| Failure Rate | 0.5% per 1,000 hours maximum (Confidence level 60% at 105) | (Voltage treatment: DC rated voltage applied for 120 minutes at 105) |
| Case Size Range | 6.35.8L to 86.7L | |
| Dimensions (mm) | D0.5 | L0.3 | A0.2 | B0.2 | C0.2 | W (0.5 to 0.8 or 0.7 to 1.1) | P (1.9 or 3.1) |
| Size Code | D | L | A | B | C | W | P |
| F61 | 6.3 | 5.8 | 6.6 | 6.6 | 7.2 | 0.5 to 0.8 | 1.9 |
| F80 | 6.3 | 7.7 | 6.6 | 6.6 | 7.2 | 0.5 to 0.8 | 1.9 |
| FA0 | 6.3 | 9.7 | 6.6 | 6.6 | 7.2 | 0.5 to 0.8 | 1.9 |
| H70 | 8 | 6.7 | 8.3 | 8.3 | 9.0 | 0.7 to 1.1 | 3.1 |
| Standard Ratings (Example) | WV (Vdc) | Cap (F) | Size code | Leakage current (A max./after 2min.) | ESR (m max./20, 100k to 300kHz) | Rated ripple current (mArms/105, 100kHz) | Part No. |
| 2.5 | 820 | F61 | 1,020 | 10 | 4,900 | APXJ2R5ARA821MF61G |
| 6.3 | 390 | F61 | 1,220 | 10 | 4,900 | APXJ6R3ARA391MF61G |
| 10 | 270 | F61 | 1,350 | 15 | 4,000 | APXJ100ARA271MF61G |
| 16 | 220 | F61 | 704 | 20 | 3,500 | APXJ160ARA221MF61G |
| 20 | 150 | F61 | 600 | 23 | 3,300 | APXJ200ARA151MF61G |
| 25 | 56 | F61 | 280 | 28 | 3,000 | APXJ250ARA560MF61G |
| Rated Ripple Current Multipliers | Frequency Multipliers (SMD type): 120Hz (0.05), 1k (0.30), 10k (0.55), 50k (0.70), 100k to 500k (1.00) |
