Home > Fixed Inductors >

CKST10045-68uH/M SMD molding power inductor designed for computers office automation and LED lighting

Product Categories

Crystals [2945]
Delay Lines [5]
Aluminum - Polymer Capacitors [1039]
Aluminum Electrolytic Capacitors [2799]
Oscillators [540]
Thumbwheel Potentiometers [25]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
Common Mode Chokes [1562]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Ferrite Beads and Chips [1587]
Wireless Charging Coils [34]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
EMI/RFI Filters (LC, RC Networks) [152]
Ceramic Capacitors [2764]
Film Capacitors [835]
Resistor Networks, Arrays [593]
Pin Configurable/Selectable Oscillators [13]
Fixed Inductors [2693]
Silicon Capacitors [2]
Ceramic Filters [216]
Adjustable Power Resistor [64]
Rotary Potentiometers, Rheostats [234]
Trimmer Potentiometers [1587]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Through Hole Resistors [711]
Resonators [79]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Tantalum Capacitors [134]
RF Filters [248]
Motor Start, Motor Run Capacitors (AC) [29]
Thin Film Capacitors [914]
Programmable Oscillators [242]
Trimmers, Variable Capacitors [9]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

CKST10045-68uH/M SMD molding power inductor designed for computers office automation and LED lighting

Current - Saturation (Isat) : 3A

Description : 3A SMD,11.6x10.1mm Fixed Inductors RoHS

Mfr. Part # : CKST10045-68uH/M

Model Number : CKST10045-68uH/M

Package : SMD,11.6x10.1mm

Contact Now

Product Overview

The CKST10045-68uH/M is a SMD molding power inductor from Cenker Technology Group. Designed for general electronic equipment, it offers a nominal inductance of 68H with a tolerance of 20%. Key applications include audio-visual entertainment, home appliances, computers, office automation, communications, power modules, LED lighting, measuring equipment, machine tools, and industrial control boards. This product is suitable for use in standard operating conditions and methods.

Product Attributes

Brand: Cenker
Product Type: SMD Molding Power Inductor
Series Name: CKST
Material: Powder Metal Alloy Powder, Copper Wire, Copper Clip (Sn plated), Marking Ink
Origin: Shenzhen, China
MSL Rating: MSL, level 1

Technical Specifications

Specification	Value	Test Condition	Notes
Product Model	CKST10045-68uH/M	-	Nominal Inductance: 68H, Inductance Tolerance: 20%
Drawing Number	SP-CK112-00061094	-	-
Dimensions (mm)	A: 11.6 Max., B: 10.10.3, C: 4.5 Max., D: 2.50.5, E: 3.00.5	-	Refer to diagram
Operating Temperature	-40 ~ +125	Including self-temperature rise	-
Storage Temperature	-40 ~ +125	-	-
Inductance	68H 20%	100kHz/1V	-
DCR (DC Resistance)	205m Max.	at 25	-
Isat (Saturation Current)	3A	L0A70% Ref. 100kHz/1V	DC current at which inductance drops approx. 30%
Irms (RMS Current)	2.3A Typical	T 40 (from 25 ambient)	DC current causing temperature rise
Absolute Maximum Voltage	DC 75V	-	-
Reflow Soldering Profile	Peak: 260 (20~40 Sec), Preheat: 150~200 (60~180 Sec), Cooling: 3/sec max, Ramp-up: 3/sec max	-	Refer to profile diagram
Iron Soldering	Power: Max. 30W, Pre-heating: 150 (1 Min), Tip Temp: 350 Max., Time: 3sec Max.	-	-
Packaging Quantity	800 Pcs/Reel, 1600 Pcs/Box, 3200 Pcs/Carton	-	-
Storage Conditions	-10 ~ 40C, 70% RH	Within 12 months	Solderability may deteriorate if exceeded

Important Usage Notes

Consider non-magnetic shielded component placement to avoid magnetic interference.
Do not place near magnets or magnetic objects.
Avoid storage in high temperature, high humidity, dusty, or corrosive environments.
Allow for thermal design margin due to self-heating during operation.
Use anti-static wrist straps during handling.
Avoid direct contact with terminals to prevent reduced solderability from hand grease.
Do not excessively bend terminals to prevent disconnection.
The product is sensitive to direct impact, which can damage the magnetic core.
When potting or gluing, be aware of potential stress on the core/skeleton, degradation of insulation/materials, and changes in high-frequency characteristics.
Surface rust may occur on alloy or non-coated products in humid environments but does not affect characteristics.
For applications beyond general electronic equipment (e.g., automotive, medical, military, aerospace, submarine), contact the sales department for consultation.

2411041754_CENKER-CKST10045-68uH-M_C5292040.pdf

Wholesale CKST10045-68uH/M SMD molding power inductor designed for computers office automation and LED lighting from china suppliers

CKST10045-68uH/M SMD molding power inductor designed for computers office automation and LED lighting Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!