Product Overview
The MS0630 is a series of low-profile, high-current power inductors designed for a variety of electronic applications. These inductors are suitable for battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays. They offer robust performance with high current handling capabilities and are engineered for reliable operation within a wide temperature range.
Product Attributes
- Brand: MOTTOTECHNOLOGY
- Series: MS0630
- Origin: SHENZHEN
- Website: http://www.coilmx.com
- Email: sales@mottotech.com
Technical Specifications
| Part Number | L0 (uH) | Inductance Tolerance | Rdc (m) @25C (TYP.) | Rdc (m) @25C (MAX.) | Heat Rating Current DC Amps. Irms (A) | Saturation Current DC Amps. Isat (A) (TYP.) |
| MS0630-R33M | 0.33 | 20% | 3.0 | 3.5 | 21.0 | 25.0 |
| MS0630-R47M | 0.47 | 20% | 3.5 | 4.1 | 15.5 | 20.0 |
| MS0630-R56M | 0.56 | 20% | 4.25 | 4.9 | 15.0 | 18.0 |
| MS0630-1R0M | 1.00 | 20% | 7.0 | 7.5 | 12.0 | 15.0 |
| MS0630-1R5M | 1.50 | 20% | 10.6 | 12.1 | 9.0 | 14.0 |
| MS0630-2R2M | 2.20 | 20% | 15.5 | 17.5 | 7.0 | 10.0 |
| MS0630-3R3M | 3.30 | 20% | 23.0 | 26.0 | 6.5 | 9.5 |
| MS0630-4R7M | 4.70 | 20% | 34.5 | 38.0 | 5.0 | 6.5 |
| MS0630-5R6M | 5.60 | 20% | 36.0 | 42.0 | 5.0 | 6.25 |
| MS0630-6R8M | 6.80 | 20% | 50.0 | 54.0 | 4.5 | 6.0 |
| MS0630-8R2M | 8.20 | 20% | 58.5 | 65.0 | 4.0 | 5.0 |
| MS0630-100M | 10.00 | 20% | 71.0 | 76.0 | 4.0 | 4.5 |
| MS0630-150M | 15.00 | 20% | 98.0 | 115.0 | 3.0 | 3.8 |
| MS0630-220M | 22.00 | 20% | 165.0 | 189.0 | 1.5 | 3.1 |
| MS0630-330M | 33.00 | 20% | 225.0 | 237.0 | 1.0 | 3.1 |
General Notes:
- All test data is referenced to 25 ambient.
- Irms: DC current (A) that will cause an approximate T of 40.
- Isat: DC current (A) that will cause L0 to drop approximately 30%.
- Operating temperature range: -55 to +125.
- The part temperature (ambient + temp rise) should not exceed 125 under worst-case operating conditions.
- The rated current listed is either the saturation current or the heating current, depending on which value is lower.
Storage and Handling:
- Storage time: within 6 months.
- Storage conditions: Temperature 5 40C, Humidity 10 75%RH or less.
- Terminal electrode solderability may degrade if stored beyond the recommended time.
- Do not use or store in a gas corrosive environment (salt, acid, alkali, etc.).
- Preheating is required before soldering.
- Temperature difference between preheating, soldering, and chip temperature should be within 150C.
- Post-installation soldering correction should be within the conditions specified in the procurement specification sheet.
- Overheating may cause short circuits, performance degradation, or reduced lifespan.
- When assembling the printed circuit board with the chip into the device, be careful not to apply residual stress to the chip due to overall deformation of the printed circuit or local deformation such as at fastening points.
- Devices generate heat when powered on (temperature rise), so ensure sufficient margin in thermal design.
- For magnetically shielded types, pay attention to coil placement during substrate design.
- Electromagnetic interference may cause malfunction.
- Use an anti-static wrist strap as static electricity from the human body can transfer to the ground wire.
- Do not place this product near magnets or magnetic objects.
- Use within the range specified in the procurement specification sheet.
Disclaimer:
This product catalog describes products for use in general electronic equipment (AV equipment, communication equipment, home appliances, entertainment equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) in a general standard application sense. For applicability, performance, and quality in the following applications (hereinafter referred to as 'Specific Applications') where high safety and reliability are required, or where failure, malfunction, or operational defects of the equipment may cause damage to life, body, or property, or may have significant social impact, the company does not provide any guarantee. If the customer intends to use the product outside the scope and conditions of this product catalog, or in Specific Applications, please consult with the relevant department of the company in advance. The company will negotiate with the customer to discuss usage purposes different from those described in this product catalog.
Specific Applications include, but are not limited to: (1) Aerospace equipment, (2) Transportation equipment (automobiles, trains, ships, etc.), (3) Medical equipment, (4) Power generation control equipment, (5) Nuclear power related equipment, (6) Submarine equipment, (7) Vehicle control equipment, (8) Public high-level information processing equipment, (9) Military equipment, (10) Electric heating appliances, combustion equipment, (11) Disaster prevention and anti-theft equipment, (12) Various safety devices, (13) Other applications deemed as Specific Applications.
Furthermore, when designing equipment using products described in this product catalog, ensure that protective circuits and devices are in place to comply with the intended use and operating conditions of the equipment, and install backup circuits as necessary.
2304140030_COILMX-MS0630-R47M_C380171.pdf
|
|
Power inductor COILMX MS0630-R47M engineered for operation in battery powered and electronic devices Images
|
